Few Tips about Corn Planter Maintenance
The performance of corn planters is a very important thing to the corn growers. According to research, you have to maintain a corn planter properly in order to get plenty of crops.
Opener Disk Observations
If you are in this field and work with corn planters, then you should keep the same number of washers under each part for the opener disc. If you want to assure about the consistent seed depth across the planter, then you should adjust the T handle each and every row and wait for a few minutes after checking about the depth of the seed.
If you want an alternative option, then you have to put a spacer under every gauge wheel which is equal to the depth of the planting. After that, you have to adjust the T handle to get the opener blades which almost don’t touch the floor.
According to Vogel, you can slide business cards from both back and front as much as possible to measure the distance between the dimension and alignment of the disk openers. You have to examine the rubber tires on the gauge wheels to find any type of crack and if there is any problem, then repair that to maintain adequate contact with the opener blade.
Stability of Seed Meter
According to the type of the seed, you have to calibrate by the seed meter. If you notice that after a while, the brushes and the pads are worn, you have to replace them immediately. As reported by Vogel, the seed meter generally is used for two weeks per year, so the chain rusts and loses flexibility. You have to use chain lubricant often to prevent these problems.
Have to Monitor Row Unit Downforce
You have to watch the passive type among the choices of row-unit downforce due to the link between the desired seed depth and travel speed. Do not forget to fit the active-air unit when the active-hydraulic reacts very quickly. You have to watch both the gauge wheel and the seed openers and this is the key to success in no-till planting. After that, you must monitor the connection between the traveling speed and closing wheels.
Consult with Specialists
If you are a farmer and want to buy good quality closing wheels for planters, then consult with the specialist of 4AG Manufacturing. They provide easy to assemble and extremely stable gauge wheels and closing wheels with a “never replacement” guarantee.