Leveling Your No Till Planter The Right Way
With a simple review of the planter bar's setup, no-till planters can avoid a lot of problems with the seed placement and furrow closing and get better results from their seeding efforts.
It doesn't matter how advanced the no-till planters, drills and air seeders are today; simple things like levelling the planter can still cause problems. Products like the Rebounder seed cover, have been receiving grievances from customers who are having difficulty putting seed corn in the bottom of the trench and closing the slot.
Farmer planters weren't being leveled properly in these instances. While driving through the field, It has been noticed that the planter's hitch was pointing slightly downward, indicating that the planter's rear was higher than its front. However, there is work to be done before pulling that no till planter into the field and setting it into the ground.
Level Your Planter:
To ensure maximum yields, you can't afford any mistakes when it comes to establishing a uniform stand. There are a few things to keep in mind before planting your first kernel of corn in the ground.
Your planter should be levelled. Prior to planting, the no-till planter should be taken out into the field for a thorough inspection. You must give yourself enough time to make the necessary adjustments without feeling rushed.
Parallel arms should run close to parallel with the ground if the main frame is threshold from front to back and side to side. The row cleaners, disc openers, and closing system will all benefit from this adjustment.
If the front units of a twin-line, split-row planter frame are full of seed, it may be necessary to adjust the frame in order to plant corn only.
Take out the Coulters
The coulters of most successful no-tillers have been removed. Once they consider removing one coulter and see how it affects their plants, growers tend to remove all of them. Throwing soil outside the seed zone is one of the drawbacks of no-till coulters. Soil cannot be gathered back around the seed in a manner that is satisfactory for slot closure.
When planting in high-moisture, no-till soils at speeds above 5 mph, wavy coulters are particularly susceptible to soil throw. No-till planterscan also have a problem with seed-to-soil contact and emergence because they often start producing a false floor in the underside of the seed slot.
Contact 4AG Manufacturing in OKC to know about the benefits in details.